Build-It-Yourself Birdhouses by Chris Peterson

Author:Chris Peterson
Language: eng
Format: epub
Publisher: Cool Springs Press
Published: 2020-01-15T00:00:00+00:00

10 Flip the frame right-side up. Set the dividers in place inside the frame with the long divider slotted into the short dividers [fig. H]. Ensure that the dividers form right angles with the frame, and then drill pilot holes and screw the frame to the divider ends with 2" deck screws.

11 Use the frame key marks on one side of the roof base to align the gables at either end of the roof base. Drill pilot holes and glue and screw the roof base to the gables with 11/2" deck screws.

12 Position a roof panel on top of the gables so that there is an even overhang on the front and back and the beveled edge is at the peak of the roof. Drill pilot holes every 2" down into the gable edges and glue and screw the roof panel to the gables.

13 Position the second roof panel butted to the first at the peak and aligned front and back. Drill pilot holes as with the first roof panel and glue and screw the roof panel to the first roof panel and the top edges of the gables [fig. I].

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.